| Properties |
DCM300 Specifications |
| Image Sensor |
1/2'' CMOS, 3M pixels, color |
| Pixel Size |
3.2µm X 3.2µm |
| Dynamic Range |
>62dB |
| MAX Resolution (Still) |
2048 x 1536 (resolution will be lower if USB1.0 is used) |
| MAX Resolution (Motion) |
6 frame/sec at 2048 x 1536 |
| Range of wave length |
400nm~1000nm |
| Sensitivity |
1.0V / lux-sec@550nm |
| White balance |
Automatic/manual |
| Exposure |
ERS(electronic rolling snap) |
| Auto-exposure |
Automatic/manual |
| Image output |
USB2.0, 480M/s |
| Power supply |
USB |
| View Field |
Inscribed rectangle of diameter 18mm |
| Usage |
Ocular-tube, photo-tube |
| File Format |
BMP. TIFF, JPG, PICT, PTL etc. |
| Shutter Control |
Automatic |
| Interface |
USB, hot plug and thrust, a USB cable of length 2m |
| System Requirement |
Windows 2000 / XP; USB cable |
| Software |
Mini disc, driver for USB 1.0 and 2.0
Software "ScopePhoto" |
| Weight |
4.8 oz without eyepiece adapter |
| Mounting port |
microscope ocular tube or trinocular port, 23.2mm mounting barrel |
| Camera Body |
black metal, 60mm cylinder shape |
| Accessories |
2 adaptors for stereomicroscope, included with the camera
diameter 30mm and 30.5mm |
Features
1) DCM300 employs newly designed optical system of fully coated, based
on MTF (modulation Transfer Function) analysis, for improved image flatness
and contrast. The images are brighter and distinct even at the periphery
of the view field. It offers excellent performance when combined with plan-achromatic
objectives system. Especially, it is designed for microscope and matches
the specific characters of microscope, such as the field of view of eyepiece
WF10x-18mm and the parfocalization of objectives.
2) DCM300 has a wide field, which matches microscope's view field of 18mm.
3) For any observation head from microscope, i.e. monocular head, binocular
head or trinocular head, DCM300 can be inserted directly into the ocular-tube
of the photo-tube. With the included adaptors of φ30mm or φ30.5mm,
it can also be used on a stereomicroscope.
4)Strong metal body.
5) True color
Note:
1) All detailed function should refer to the software ScopePhoto.
|
Introduction about software ScopePhoto
ScopePhoto is an image processing software professionally designed for
digital cameras, including DCM35, DCT35, DCM130, DCT130, DCM210, DCM300,
and DCT210. Except the basic image file operation and processing, the ScopePhoto
has the following characteristic specially designed for the scientific
analysis of the captured image through the camera or other image capture
devices. The main functions of the ScopePhoto are listed as follows:
a) Image archival with data attachment (*.PTL format, other formats are
also supported)
b) Image capture through VFW and Twain interface
c) Image cut-&-paste from image to image, image to file
d) Image basic operations like other similar software are included in the
image menu. At here you can adjust the image at ease
e) Image layer operation specially designed for the measurement operation
(Layer technique is used to separate the measured results and the different
results can be put on different layers)
f) Image processing filter for noise reduction and enhancement (image enhancement
filters. edge enhancement filters, morphology operation filters. user defined
kernel filter, include convolution and morphological filters)
g) Image arithmetic operation between image and image, image and digital
number (including AND, OR, XOR, NAND, NOR, NOT, Add, Subtract, Multiply,
Divide, Absolute, Min, Max, Average, Invert, Logarithm, Exponential, Square
Root, Square, X to the power of Y operation)
h) Image pseudocode, range, segmentation operations are also include in the application
i) Image zooming and panning operations |
|
